FF-VXMTB-XAD-BSDT

$139.99

Isolate your Drift or Garmin 360 camera from vibration.
VibeX Gel engineered to stabilize your camera from the most common vibration frequencies effecting HD cameras.
Patented design holds the camera rock steady in the most extreme environments.
The standard adapter fits any Drift cameras, Garmin Virb 360, and other standard 1/4-20″ cameras.
Included tie down ring base adapts any standard tie down ring on most Cessna, Piper, and Beech to a VibeX mount.

SKU: FF-VXMTB-XAD-BSDT Categories: , , , , , , , , , , , Tags: , ,

Description

Instructions:

VibeX Ball Mount
VibeX Adapter Standard for Drift, Garmin 360, etc.
Rock Steady Tie Down Ring Base

VibeX Mount
The Rock Steady VibeX mount cancels jello effect, stops global shutter, and isolates your camera from vibration. The VibeX mount solves high airspeed and engine vibration issues. VibeX Gel is engineered to completely isolate and stabilize your camera from the most common vibration frequencies effecting HD cameras. The patented VibeX gel design eliminates vibration where it matters most, at the camera! The patented design, along with the mounts rigid machined aluminum construction holds the camera rock steady in the most extreme environments. Years of testing on nearly every type of aircraft and vehicle has led to the perfect solution. Many electronic stabilizers are expensive and do not hold up. Your camera is only as good as your mount. There is no substitute to a good quality static isolation mount to kill jello. The VibeX mount is every professionals best tool. Compatible with all Rock Steady bases.
Standard Adapter
The Drift cameras fit the VibeX mount easily with a simple stud adapter. One end of the stud adapter threads into the camera. A preset spacer is has been adjusted to the perfect distance to slightly compress the VibeX gel allowing maximum vibration isolation. A thumb nut holds the camera and adapter on the VibeX mount. Fits any Drift cameras, Garmin Virb 360, and other standard 1/4-20″ cameras.
Rock Steady Tie Down Ring Base
With the Rock Steady Tie Down Ring Base, quickly turn any standard tie down ring into a camera mount. This clamp can be easily tightened by hand making it a FAA temporary compliant mounting device. The thumb screw hex drive head allows you to tighten with the included hex wrench too. The aluminum centering nut allows quick attachment to any tie down ring with up to a 1 inch diameter hole. The centering nut has a grooved outer edge allowing a perfect fit on most standard aircraft such as Cessna, Piper, and Beech tie-down rings. This tie down ring base is compatible with all Rock Steady mounts. Some attachments such as Piper tail rings may require the addition of two large flat washers.

FF Approval rating for this product: 
Safe & Secure
FAA Temporary
FAA Minor Alteration
FAA Approval Available

Click for more info on FF Approval Ratings

Add a Rock Steady Base. (Not compatible with Slim Mounts)

PRODUCT GUARANTEE and WARRANTY!

You may also like…