Rock Steady Surface Base w/ .5″-1.5″ Clamp

$79.99

Experimental surface pole mounts for 360 cameras.
Get your 360 camera the extra distance forward of the wing.
All aluminum parts with stainless steel hardware.
Clamps 1/2″ to 1 1/2″ diameter poles.
Requires 2 kits, and pole for building 360 pole mounts.

Description

By popular demand, this suface base combination is requested by many for buidling experimental pole mounts for 360 cameras. Two of these all metal kits can get your 360 camera the extra distance forward of the leading edge.
All aluminum parts with stainless steel hardware. The universal base fits most wing tip screws and inspection covers. Each base fits any two screws between 2 and 5 inch spacing.(Larger base available by special order).
The pole clamp fits 1/2″ to 1 1/2″ outer diamerter tubing/poles.
Note:
Make sure you purchase 2 of these for building pole mounts. A pole requires two points to hold it properly.

This kit contains one surface base, rubber pad, clamp and hardware (2 each #8 screws, #10 screws, and washers). Quantity 2 of these kits is required for a pole mount setup

DISCLAIMER!
FLIGHT FLIX ROCK STEADY POLE MOUNTS AND ASSOCIATED COMPONENTS ARE NOT FAA APPROVED. USE OF ANY COMBINATION OF POLE MOUNT PRODUCTS ARE AT THE USERS OWN RISK AND SOLE REPONSIBILITY OF THE USER.
NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A SPECIFIC PURPOSE, THE PRODUCTS TO WHICH THE INFORMATION MENTIONS MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS, OR OF ANY OTHER NATURE ARE MADE WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION MENTIONS. IN NO CASE SHALL THE INFORMATION BE CONSIDERED A PART OF FLIGHT FLIX LLC TERMS AND CONDITIONS OF SALE.

Instructions:

Rock Steady Surface Base w/ .5″-1.5″ Clamp

FF Approval Rating for this product: None Click for FF Approval Rating descriptions

None

 

 

IMPORTANT PRODUCT GUARANTEE OR WARRANTY!